Core parameters of step-by-step height synchronous jacking equipment: Specification and model: KET-JS-250

Hydraulic bolt tensioners are widely used in various industries, especially in energy industries such as wind, nuclear, thermal and hydropower.

PLC jacking and slope control system is a control system that uses PLC technology to realize jack jacking and slope adjustment, which is used to control the lifting

The principle of bridge walking integral jacking is to gradually push the prefabricated steel box girder to the predetermined position of the main structure of the bridge through the propulsion force of the walking intelligent jacking hydraulic system.

In addition to training personnel to use our products skillfully, they also need to conduct on-site inspections to make plans and suggestions for the current project.

Compared with ordinary hydraulic jacks with the same body height, multi-stage hydraulic jacks have a larger working stroke, can work in limited space, and lift higher heights in a single time, avoiding the repeated work of high jacking, saving time and improving jacking efficiency.

The H-type hydraulic press can move the pressure platen in the up and down directions, and move the crimping cylinder in the left and right directions, which is convenient for motor repair

When the bridge bearings are damaged and aged, we need to replace the bearings. If you want to do a good job, you must first sharpen your tools, and such a PLC-controlled synchronous jacking system for bridge jacking came into being.

The important structural components connecting the bridge superstructure and the substructure are located between the good cushion stones of the bridge

The PLC synchronous jacking hydraulic system is mainly used in the research and development area to increase the bottom clearance of the bridge and replace the rubber bearing.

When the building first tilts, it has little impact on the building, but with the further occurrence of uneven settlement, when the tilt reaches a certain value, it will affect the appearance of the building at best

Correction belongs to special technical engineering, and the technical difficulty required is high and the risk is high.

Due to the lack of understanding of the importance of foundation problems, complex foundation problems are often simplified.

PLC synchronous jacking correction can be used for multi-storey buildings, high-rise buildings and ancient buildings

The commonly used method of correcting deviations in high-rise buildings is to jack the foundation superstructure on the side with large settlement to make it vertically meet the design requirements.

As offshore oil development continues to move towards the deep water area, the area and volume of offshore oil platforms are growing, and the traditional crane installation can no longer meet the demand

The main components of the hydraulic jack are composed of cylinder block, piston rod, sealing ring, oil block, joint, etc.

【Customized Product Display】Single-acting heavy-duty reset hydraulic jack