Recently, relevant news reported that a collapse occurred during the construction process in Henan, which had a great impact on the society, and we once again remind everyone to work safely.

Foreword: We have just customized a batch of ultra-high pressure hydraulic jacks for the customer, with a pressure of 250MPa and a bearing capacity of 150 tons. Because the volume is smaller than that of ordinary hydraulic jacks

Hydraulic jack faults and solutions, I believe that through the study of this article, you can gain a lot of knowledge about hydraulic jack maintenance.

Previously, we often mentioned the operation precautions when training employees on the use process of hydraulic jacks, and here I need to sort them out in detail. This is actually the same as driving

Single-acting hollow hydraulic jack The special hollow piston design allows the drawbar or cable to run through the entire cylinder for mechanical traction systems. It can also be used as a regular jacking.

For maintenance or lifting small objects, a 5-50T hydraulic jack is usually sufficient.For lifting large, heavy objects or large steel structures, choose 200T-2000T high-tonnage hydraulic jacks.

How to quickly choose the right hydraulic pump station for jacks can be roughly divided into three steps.

First of all, you must know the weight that needs to be lifted, and the load capacity of the hydraulic jack should be at least 1.2 times the weight.

The main role of hydraulic jacks is lifting and supporting, and the pressure is relatively large, and long-term use may be damaged due to improper operation or tool fatigue.

When using, it should be strictly in accordance with the tonnage size of the jack, and do not overload and overtravel, otherwise when the lifting tonnage or lifting height exceeds the regulations, the hydraulic jack will cause serious oil leakage.

Everyone should be familiar with the jack, which is a kind of equipment used for lifting, and there are many types of jacks now, and hydraulic jacks are one of them.

Hydraulic jacks are often used in harsh working conditions, so they need to be cleaned after a period of use.