100 ton thin self-locking jack

The biggest difference between a 100 ton thin self-locking jack and an ordinary jack is its unique piston self-locking function. In industrial conditions, we often encounter the need to suspend jacking, but we must keep the jack in a jacking state. If you encounter extreme conditions, such as outdoors in extremely cold weather, the aging of the sealing ring or oil leakage caused by long-term exposure, this will lead to the retraction of the piston, which will affect the maintenance of the entire jacking state.

Then the jack with self-locking function can avoid the above situation, due to the threaded structure of the piston rod, just push the ring on it to contact the cylinder block, so that the oil pipe can be loosened without the need for the electric pump to hold pressure. The self-locking structure of the 100-ton thin self-locking jack is used to realize the function of mechanical support.

This self-locking jack is often used for the jacking of steel structures, and when long-term support is required, it is very convenient to realize the safety of lifting steel structures. Caint's low-profile self-locking jacks are used for tank installation of nuclear power and steel structure support for steel structure bridge maintenance. The characteristics of durable and easy use are the evaluation of the Caint jack by customers. Because we know that only by truly doing a good job in products and providing customers with good products and services is the fundamental prerequisite for the long-term development of the enterprise.

If you need to choose other types of hydraulic jacks: "Hydraulic jack selection"